Glass Tempering Insights: Latest News

1. Seal the two pcs of glass edges with PVB film strip. Pls note that, before sealing, the PVB film strip should be put in the glue for some minutes2. Inject the laminated glass glue from the corner3. Fix the two pcs glass with clamps4. Put the glass under sunshine for at least one hourPicture for y

1. ScopeThis standard clarifys the term, definition, classification, technical requirements, test methods, inspection rules, mark, packing, transportage, storage of the heat strengthened glass.This standard is suitable for the heat strengthened glass which for architecture; for the glass used for ot

1. ScopeThis standard clarifys the term, definition, classification, technical requirements, test methods, inspection rules, mark, packing, transportage, storage of the heat strengthened glass.This standard is suitable for the heat strengthened glass which for architecture; for the glass used for ot

for most glass tempering furnace, the processing is automatic, for the operator, when they produce one new glass type or specification, they just need to adjust the processing parameters, such as heating time, cooling time, quenching air pressure, etc.But some time, the oven door could not open auto

For most glass processing factory, when they glass tempering furnace to produce tempered glass, sometime, after tempering, the tempered bent upward or downward. How to solve this problem, we give you below suggestions: 1. if the problem just happened without change any parameters or anything, pls ch

Glasstech Canada expo glass technology is a professional fair in glass industry, it is for glass processing, windows, doors, aluminium processing, etc.the expo date is Nov.06 to Nov.09, in

Glass tempering furnace is used to produce various tempered glass, flat tempered glass, curved tempered furnace glass, etc. Tempered glass can be seen everywhere in daily life and is used more and more widely. There are more and more glass processing companies producing tempered glass. How to effect

Here, we would like to give you the guide suggestion on how to clean the ceramic rollers of tempering furnace.1. Please take off the ceramic rollers carefully from oven2. Use water sandpaper (namely, waterproof abrasive paper, which grit number is 800-1000#) to swab rollers. 3. Clean rollers with wa