Solutions for Glass Tempering and Processing Challenges

1. Encoder malfunction:The encoder's components have malfunctioned, resulting in its inability to generate and output correct wave forms. In this case, it is necessary to replace the encoder or repair its internal components. 2. Encoder connection cable fault:The probability of this type of malfunct

Measurement of edge waviness: Place the tempered glass upright on a glass frame, with the lower surface of the glass in contact with the roller facing outward. Use a 300mm knife edge ruler to align one end of the ruler perpendicular to the glass front (or back) and close to the glass. Use a feeler g

Compressed air plays an important role in the production of tempered glass: it not only serves as the air supply source for numerous actuators in the glass tempering furnace, but also plays a unique role in temperature balance within the heating furnace. Therefore, it is very important for the air c

1. Check the equipment:Before loading, the conveyor rollers of loading table should be inspected and cleaned to keep the surface clean and avoid dirt sticking to the float glass sheet, thereby affecting the quality of the glass. 2. Check the float glass:The factors that affect the quality of tempere

1. Re-adjust the arc of the curved air grille according to the radius parameters of the required glass specifications. 2. Place the glass on the bending section and lower the upper quenching, turn off the air supply of the pressure roller, release the locking device of the upper pressure roller cyli

What is tempered glass wind spot:Wind spots, also known as stress spots, reflect from the necessary polarization angle of glass under polarized or partially polarized illumination conditions. The optical effect is caused by the birefringence phenomenon of tempered glass (tempered glass raw material)

1. Glass tempering furnace operators need to understand the working principles, technical parameters, and other aspects of the equipment.2. Know well about the production process of glass tempering furnaces and operate strictly in accordance with the tempering process requirements of the machine man

1. Different material requirements:Because the high stress fire-resistant glass tempering furnace not only needs to toughen ordinary sodium calcium silicate glass, but also needs to be able to toughen high borosilicate fire-resistant glass, the temperature inside the furnace is about 100 degrees hig