Views: 0 Author: Site Editor Publish Time: 2023-12-03 Origin: Site
1. Re-adjust the arc of the curved air grille according to the radius parameters of the required glass specifications.
2. Place the glass on the bending section and lower the upper quenching, turn off the air supply of the pressure roller, release the locking device of the upper pressure roller cylinder, adjust the stroke of the upper pressure roller, so that the upper pressure roller just presses against the upper surface of the glass. After adjustment, tighten the locking device of the cylinder, turn on the air supply, and adjust the pressure to 2-3 kilograms.
3. Adjust the nozzle height of the upper and lower quenching according to the thickness of the glass to be processed.
4. To eliminate the need for processing glass, reset the process parameters such as arc lifting height, arc lifting speed, blowing delay time, etc.
5. Adjust the position of the positioning baffle inside the quenching according to the arc length of the glass to be processed, and reset the distance of the glass from the furnace and the effective distance of the quenching.