Glass Tempering Insights: Latest News

During the production of tempered glass, operators may experience glass breakage inside the tempering furnace, which is known as furnace explosion and is an abnormal situation in tempered glass production. Because glass breaks inside the tempering furnace, it usually needs to be cooled and cleaned,

The service life of the ceramic roller conveyor in the glass tempering furnace is closely related to the usage, maintenance, and application environment of the equipment.Ceramic roller cleaning steps:1. Before touching the ceramic roller conveyor of the tempering furnace, clean your hands first. If

Considering the time and power consumption of the heating process of the furnace, as well as the lifespan of the ceramic roller conveyor, glass tempering furnaces in general tempering plants work 24 hours a day, and even if they are not in production, they will remain in insulation standby mode. How

The ceramic rollers of the glass tempering furnace can be cleaned with water, but attention should be paid to the water temperature, water quality, and cleaning method to avoid damage to the ceramic rollers.As a key component in glass processing equipment, the cleanliness of ceramic rollers in glass

When using a tempering furnace to produce various types of glass, you should pay attention to the following five points:1. When tempering glass with holes and grooves, the heating time should be increased by 2.5%-5% compared with glass without holes and grooves of the same specification.2. When temp

First checks which we made was made on hot furnace:1. Blowers of convection, does it work right hZ, does it switch on/off on right time of the cycle. Everything works fine.2. Heaters. Resistance and load of each heater. Everything is ok.3. SSR which are switching ON/OFF heaters. It works fine.4. Tem

Is it necessary to choose top and bottom force convection system for glass tempering furnace?Not necessaryForce convection system is mainly used to temper the coating glass, especially for procesing Low-e glass.because there is one coating layer for coating glass, and this coating layer is upper sur