Glass Tempering Insights: Latest News

During the production of tempered glass, operators may experience glass breakage inside the tempering furnace, which is known as furnace explosion and is an abnormal situation in tempered glass production. Because glass breaks inside the tempering furnace, it usually needs to be cooled and cleaned,

The service life of the ceramic roller conveyor in the glass tempering furnace is closely related to the usage, maintenance, and application environment of the equipment.Ceramic roller cleaning steps:1. Before touching the ceramic roller conveyor of the tempering furnace, clean your hands first. If

Considering the time and power consumption of the heating process of the furnace, as well as the lifespan of the ceramic roller conveyor, glass tempering furnaces in general tempering plants work 24 hours a day, and even if they are not in production, they will remain in insulation standby mode. How

The ceramic rollers of the glass tempering furnace can be cleaned with water, but attention should be paid to the water temperature, water quality, and cleaning method to avoid damage to the ceramic rollers.As a key component in glass processing equipment, the cleanliness of ceramic rollers in glass

1. If there is foreign matter on the rollers of the tempering furnace, it will cause regular scratches on the surface of the glass. Because the position of the foreign matter is fixed, the scratches on the glass are also regular; at this time, we can check the rollers' conditions of the heating furn

1. Blower Installation requirements1.1. Outdoor fans should be protecting by canopy. Prevent lay up fans in open-air1.2. Inspect every parts of fan carefully, to confirm whether the right specification and type of fan. Whether the impeller is in the right direction or not as requirement and whether

fault lies, reasonable repair and exclude, to avoid damage and safety incidents.1. Fan vibration is too large1.1. The impeller is excessive dust, overdose dirt, corrosion or war and tear caused by balance lapsed.1.2. The impeller and the volute or duct contact deformation.1.3. Loose rivets connectin