Active link belt has longer service life and stronger pulling force, so for some glass tempering furnace manufacturer, they use this kind of belt for the ceramic roller driving. But its cost is much higher than the normal PU belt. And when replacement, this active link belt needs longer time.
When you buy this link belt, you should buy the same specification as your old belt.
| Quantity: | |
|---|---|
LKT012
LEVER
84759000
Application: for ceramic roller driving on glass tempering furnace
Color: red
Type: A, B, C, Z. (A type is more popular for glass tempering furnace)
Technical parameters:
For the link belt without rivet
Type A:
Width: 13mm
Min. Radius: 100mm
Max. Tension value: 1200N
Abrasion resistance: 38-47
Roll Length: 50M
Type B:
Width: 17mm
Min. Radius: 110mm
Max. Tension value: 1600N
Abrasion resistance: 38-47
Roll Length: 50M
Type C:
Width: 22mm
Min. Radius: 125mm
Max. Tension value: 2100N
Abrasion resistance: 38-47
Roll Length: 50M
Type Z:
Width: 11 or 10mm
Min. Radius: 145mm
Max. Tension value: 800N
Abrasion resistance: 38-47
Roll Length: 50M
For the round link belt without rivet
Type MO:
Width: 8mm
Min. Radius: 80mm
Max. Tension value: 500N
Abrasion resistance: 38-47
Roll Length: 50M
Type ZO:
Width: 9.5mm
Min. Radius: 90mm
Max. Tension value: 600N
Abrasion resistance: 38-47
Roll Length: 50M
For the link belt with rivet
Type A:
Width: 13mm
Min. Radius: 100mm
Max. Tension value: 1300N
Abrasion resistance: 38-47
Roll Length: 50M
Type B:
Width: 17mm
Min. Radius: 110mm
Max. Tension value: 1700N
Abrasion resistance: 38-47
Roll Length: 50M
Type C:
Width: 22mm
Min. Radius: 125mm
Max. Tension value: 2200N
Abrasion resistance: 38-47
Roll Length: 50M
Type Z:
Width: 11 or 10mm
Min. Radius: 145mm
Max. Tension value: 900N
Abrasion resistance: 38-47
Roll Length: 50M
Test report:
Tensile strength (at room temperature): 549N
Tensile strength (at low temperature): 491N
Tensile strength (at high temperature): 586N
Tensile strength (acid resistance): 382N
Tensile strength (alkali resistance): 432N
Wear resistance: 15mg
Product Description:
The silicone belt material is vulcanized on the surface of the rubber conveyor belt in the form of an integral silicone, which has excellent high temperature resistance, electrical insulation, oil resistance, non stick surface, and oil resistance.
Application: for ceramic roller driving on glass tempering furnace
Color: red
Type: A, B, C, Z. (A type is more popular for glass tempering furnace)
Technical parameters:
For the link belt without rivet
Type A:
Width: 13mm
Min. Radius: 100mm
Max. Tension value: 1200N
Abrasion resistance: 38-47
Roll Length: 50M
Type B:
Width: 17mm
Min. Radius: 110mm
Max. Tension value: 1600N
Abrasion resistance: 38-47
Roll Length: 50M
Type C:
Width: 22mm
Min. Radius: 125mm
Max. Tension value: 2100N
Abrasion resistance: 38-47
Roll Length: 50M
Type Z:
Width: 11 or 10mm
Min. Radius: 145mm
Max. Tension value: 800N
Abrasion resistance: 38-47
Roll Length: 50M
For the round link belt without rivet
Type MO:
Width: 8mm
Min. Radius: 80mm
Max. Tension value: 500N
Abrasion resistance: 38-47
Roll Length: 50M
Type ZO:
Width: 9.5mm
Min. Radius: 90mm
Max. Tension value: 600N
Abrasion resistance: 38-47
Roll Length: 50M
For the link belt with rivet
Type A:
Width: 13mm
Min. Radius: 100mm
Max. Tension value: 1300N
Abrasion resistance: 38-47
Roll Length: 50M
Type B:
Width: 17mm
Min. Radius: 110mm
Max. Tension value: 1700N
Abrasion resistance: 38-47
Roll Length: 50M
Type C:
Width: 22mm
Min. Radius: 125mm
Max. Tension value: 2200N
Abrasion resistance: 38-47
Roll Length: 50M
Type Z:
Width: 11 or 10mm
Min. Radius: 145mm
Max. Tension value: 900N
Abrasion resistance: 38-47
Roll Length: 50M
Test report:
Tensile strength (at room temperature): 549N
Tensile strength (at low temperature): 491N
Tensile strength (at high temperature): 586N
Tensile strength (acid resistance): 382N
Tensile strength (alkali resistance): 432N
Wear resistance: 15mg
Product Description:
The silicone belt material is vulcanized on the surface of the rubber conveyor belt in the form of an integral silicone, which has excellent high temperature resistance, electrical insulation, oil resistance, non stick surface, and oil resistance.
