Solutions for Glass Tempering and Processing Challenges

The air quenching section of the glass tempering furnace is the area where the glass enters after heating, and the glass is cooled and shaped after blowing through the air quenching section. During the production of the tempering furnace, an initial position is set for the upper air quenching sectio

The heating temperature and time of the glass tempering furnace have a direct impact on the quality of glass tempering. The heating temperature, heating time, and uniformity of heating can all affect the flatness of glass after tempering. So, what is the heating temperature of a glass tempering furn

A glass tempering furnace, also known as a tempering furnace, is an equipment used to produce tempered glass. It improves the strength of the glass by forming a compressive stress layer on the surface of the glass. There are many sub categories of production equipment suitable for different working

After being processed in a tempering furnace, the original glass will exhibit pitting, which is actually a manifestation of the appearance quality defect of tempered glass. Generally, appearance quality defects are related to the production operation of the tempering furnace and the control of vario

Tempered glass is cut into the required dimensions after production and enters the glass tempering furnace to complete tempering. The common problem with glass during the tempering process is cracking, which mainly occurs in the heating stage, quenching and cooling stage, and tempering stage of the

Tempered glass can be seen everywhere in daily life, whether it is building exterior walls, decorative glass, automotive glass, etc. Nowadays, its application is very extensive. During the use of tempered furnaces, various problems are inevitable, some equipment malfunctions, and some external force

The production of tempered glass requires a process of heating, cooling, and forming, and the parameter settings in each stage are related to the yield and quality of tempered glass. These parameters are not fixed when set, but need to be set according to the different parameters of the glass temper

Most mechanical equipment requires electricity for operation. If a trip occurs, not only will the equipment not function properly, but it may also affect the safety of the operators. Therefore, it should be taken seriously. To solve the problem of tripping, it is necessary to first understand the ca