How To Solve The Noise of Glass Tempering Furnace? And The Causes And Handling Methods for Noise of Glass Tempering Furnace

Mechanical equipment can produce noise to some extent during the production process, and glass tempering furnaces are no exception. During the production process, tempering furnaces inevitably emit some noise. However, the sound source characteristics of tempering furnaces are complex and cannot be directly controlled, and they have strong diffusion. So how to solve the noise of the glass tempering furnace?

1. The causes of noise in glass tempering furnaces

1.1. The noise of the glass tempering furnace may include transmission click noise and equipment body noise, including inherent sounds emitted by motors, equipment casings, and vibrations.

1.2. The noise generated by the operation of the heating section fan, the exhaust noise of the tempering furnace, and the noise generated when the high-pressure steam is released from the tempering furnace through the exhaust pipe outlet.

1.3. The normal equipment sound generated during the operation of spare parts, as well as the unavoidable sound during the process of loading and unloading, work communication, transportation, etc. within the factory.

The causes of noise generation in tempering furnaces are complex and cannot be directly controlled. It is impossible to control or reduce the generation of sound from the perspective of equipment. Only by adjusting the external environment can the spread of noise be reduced or reduced.

2. How to solve the noise of glass tempering furnace

2.1. Noise treatment methods for glass tempering furnaces

(1) The soundproof room used in the production of glass tempering furnace equipment blocks the path of sound transmission and weakens the impact of noise on the surrounding external environment.

(2) Use a soundproof cover and use square tubes as a frame inside the soundproof cover, with sound-absorbing and soundproof panels laid on top to weaken the propagation of sound.

(3) Set up a plate type muffler (noise reduction device) at the upper part of the glass tempering furnace, install sound insulation doors at appropriate positions in the factory, set up noise reduction air inlet ventilation and noise reduction louvers on the tempering furnace assembly line, and install axial flow fans inside the air inlet to force air intake and heat dissipation, maintaining good ventilation and heat dissipation conditions in the production workshop.

2.2. Introduction to Noise Control Equipment

(1) Ventilation and noise reduction louvers: Made of galvanized sheet, the radiation range that can attenuate noise can be reasonably set. The microporous piston type sound absorption resonator set below the blades is used to absorb noise, solving the ventilation problem inside the sound insulation hood and meeting the noise emission standards.

(2) Sound absorption and soundproofing board: The main material of the soundproofing room is composed of soundproofing board (galvanized steel plate), anti resonance frame, sound-absorbing material, industrial galvanized perforated sound-absorbing board and other main materials, which can provide sound insulation and support reuse, and have a beautiful appearance and good sealing effect.

(3) Plate type silencer: Made of galvanized perforated sound-absorbing plate, the plate spacing meets the needs of heat dissipation and noise leakage control through reasonable layout.

The above is an introduction to how to solve the noise of glass tempering furnaces, which includes the causes and treatment methods of furnace noise. The generation of noise during equipment production is inevitable, and we can only weaken the frequency of noise propagation and reduce its impact by installing soundproofing or soundproofing devices around the production environment.