| Quantity: | |
|---|---|
LKV003
LEVER
84669100
Color: light green
Working temperature: 180℃ this thermal tape could be heated continuously more than 180℃with strong tear resistance.
Function: no glue left after peeling off
Popular sizes:
25mm*66M/roll
50mm*33M/roll
50mm*66M/roll
Technical parameters:
Adhesive type: Silicon
Thickness: 0.06mm
Carrier: Polyester film
Adhesive strength: 4-8 N/25mm
Initial tack: <60mm
Holding power: >48h
Max, temperature resistance: 220℃
Insulating voltage: 3-8V
FAQ:
Q. : Why should i use this thermal tape?
A. It is used to prevent the exit out of the EVA inside autoclave during vacuuming.
Q.Do we need to make some holes on the thermal tape for vacuuming the air out?
A. It depends the processing situation. If there is no bubbles in the EVA laminated glass after vacuuming, then no need to make the holes.
If there is bubbles, you can make some holes on the thermal tape to help the pre laminated glass de-airing vacuuming.
Q.:Will the thermal tape left glue on the glass?
NO.
Color: light green
Working temperature: 180℃ this thermal tape could be heated continuously more than 180℃with strong tear resistance.
Function: no glue left after peeling off
Popular sizes:
25mm*66M/roll
50mm*33M/roll
50mm*66M/roll
Technical parameters:
Adhesive type: Silicon
Thickness: 0.06mm
Carrier: Polyester film
Adhesive strength: 4-8 N/25mm
Initial tack: <60mm
Holding power: >48h
Max, temperature resistance: 220℃
Insulating voltage: 3-8V
FAQ:
Q. : Why should i use this thermal tape?
A. It is used to prevent the exit out of the EVA inside autoclave during vacuuming.
Q.Do we need to make some holes on the thermal tape for vacuuming the air out?
A. It depends the processing situation. If there is no bubbles in the EVA laminated glass after vacuuming, then no need to make the holes.
If there is bubbles, you can make some holes on the thermal tape to help the pre laminated glass de-airing vacuuming.
Q.:Will the thermal tape left glue on the glass?
NO.
