Solutions for Glass Tempering and Processing Challenges

As a glass tempering equipment, the glass tempering furnace requires electricity to provide power for both the heating and cooling systems during operation. Does the glass tempering furnace consume much electricity? It should be noted that there are many factors that affect the energy consumption of

The arc edge cracks of bent/curved tempered glass usually occur during the bending and tempering process of thick glass with small radius, especially at the front end of tempered glass processed by soft shaft bent glass tempering furnace, this problem is more common. There are several possible reaso

if you want to change the blower location from side to top, the main work as below:1. you should change the direction of blower volute (change to 90 degree). you should cut off the support of blower volute, change the blower volute to 90 degree and weld the support well. and during this process, you

After some time, maybe you found the kevlar rope of quenching rollers is loosing. And There are several reasons for this as below: 1.The glue is not good, it is not firmly adhered. But the glue only serves as an auxiliary function, and the most important thing is to tightly wrap the aramid kevlar ro

The following parameters are summarized by our glass tempering furnace operators based on years of practical operation experience:Product: 15mm clear float glass Heating time: 760 seconds Heating temperature: Upper oven: 670℃ Lower oven: 665℃ Heating power: Upper oven: 80 Lower oven: 75 Blowing dist

What is double two heating oven chamber glass tempering furnace?Double heating chamber glass tempering furnace, also known as two-chambers tempering furnace, combined tempering furnace, and double chamber glass tempering equipment, etc. For this glass tempering furnace, it has two separate heating c

The thermocouple of the glass tempering furnace is an important temperature sensor, and its application in the tempering furnace has Important significance. Although there are some issues, through reasonable use and maintenance, it is possible to rechargeUtilize its advantages to improve the product

After heating and cooling, the glass will be transferred to the unloading table section of glass tempering furnace, but sometimes the glass will not stop automatically when it comes to unloading table and falling off. If this problem happens, please check the following reasons: 1. The problem with t