Maintenance And Troubleshooting Methods for The Lifting Transmission Device of The Glass Tempering Furnace

The main function of the lifting and driving device for the glass tempering furnace is to facilitate the placement of fragments, maintain a stable transmission of glass to the roller conveyor, and complete the transmission of glass. So for the lifting and transmission device of the tempering furnace, our main concern is still the smoothness of its operation and improvement process. This requires attention to maintenance and upkeep during use to maintain its good operating condition. Here we will introduce the maintenance methods and common troubleshooting suggestions for the lifting and transmission device of the glass tempering furnace.

1. Maintenance method for the lifting and transmission device of the glass tempering furnace

1.1. Timely oil replenishment: In order to ensure the smooth lifting of the furnace body, an appropriate amount of N46 engine oil should be injected into the trapezoidal screw in the tempering furnace when the furnace top is lifted, to ensure the corresponding lubrication effect. During the transmission process, the bevel gear should be coated with lithium based grease in a seasonal manner.

1.2. Proper cleaning: Daily cleaning of the transmission device of the lifting platform to prevent foreign objects from entering and causing wear. At the same time, regularly lubricate the gear pair and guide rail pair to avoid rusting or insufficient lubrication, which may affect the normal operation of the equipment due to lifting and jamming.

1.3. Check the tensioning chain: If the tempering furnace operates for a long time and the parts become loose, it is a normal phenomenon. The parts should be tightened in a timely manner. When the sprocket gear jumps off, it indicates that the tension of the chain is insufficient and the tensioning sprocket needs to be adjusted.

1.4. Regular replacement of reducers: In addition to annual replacement, regular inspections should also be carried out for top lifting reducers to prevent problems or equipment aging that may affect processing and production. At the same time, 40 # or 30 # lubricating oil should be used for lubrication.

1.5. Regular inspection of electrical components: Check for potential hazards such as short circuits in electrical components, clean dust, remove oil stains, and ensure the normal operation of electrical components.

2. Troubleshooting method for the lifting and transmission device of the glass tempering furnace

2.1. Lift button malfunction: The malfunction of the lift button may be due to a lack of power supply or damage to the equipment motor. Power supply maintenance or motor troubleshooting is required.

2.2. Abnormal noise during lifting: The abnormal noise found during lifting may be due to a lack of lubricating oil or wear of the lifting device. It needs to be observed after adding lubricating oil. If there is no relief, there may be wear of spare parts, which needs to be stopped for maintenance. If the bearing is damaged, it needs to be replaced.

The above are the maintenance methods and troubleshooting methods for the lifting transmission device of the glass tempering furnace. There are many possible faults in the glass tempering furnace, but they mainly focus on the above two types. If you encounter any other problems during use, please feel free to call us for consultation. We have rich experience in the production and maintenance technology of tempering furnaces and can provide you with corresponding solutions and suggestions. If you have equipment purchase needs, please feel free to contact us.