How to clean ceramic rollers after use

Ceramic rollers are a type of roller made from ceramic processing. After using ceramic rollers, attention should be paid to their cleaning work. Currently, the main methods for cleaning ceramic rollers include powder spraying and cleaning.

1. Powder spraying cleaning

The method of powder spraying cleaning is a method of using external impact, which is completely a physical action. Whether the ceramic rollers can be cleaned clean mainly depends on the stability and size of the air pressure. The advantage of this method is that it has a lower cost and a simpler structure, making it very convenient to operate. However, there are also many drawbacks. The size of the powder particles is different, and it is prone to clumping and clogging the nozzle. If the ceramic rollers with high wire numbers cannot be cleaned thoroughly, and if the air pressure is consistently high, the mesh wall may be damaged and the mesh rod may become useless over time. In addition, this method of powder leakage is likely to occur, affecting the environment, And because the flow rate of air pressure is different, there may be differences in the cleanliness level when cleaning ceramic rollers using this method.

2. Sonic cleaning

This is a relatively new method that combines physical and chemical corrosion prevention, using very fine water bubbles to easily clean the dirt inside the mesh holes. Therefore, the effect of using this method to clean high thread count ceramic rollers is also very obvious. This ultrasonic device is also a very environmentally friendly cleaning device, which can clean ceramic rollers and other printing sticks of various materials without causing damage to the environment. However, ultrasonic cleaning equipment also has its shortcomings, such as high manufacturing costs and noise generation during operation. If cracks appear on the ceramic rollers, using it for cleaning may make the cracks more severe.

Therefore, after using ceramic rollers, it is necessary to choose a more suitable one based on the actual situation of the enterprise and the state of the ceramic rollers, in order to extend the service life of the ceramic rollers.