Views: 0 Author: Site Editor Publish Time: 2023-11-15 Origin: Site
How to replace the aramid rope on the transmission roller table of the cooling section of the tempering furnace?
1. The cooling section of the tempering furnace is composed of transmission rollers and upper and lower air grilles. In actual production, if the glass bursts in the cooling section, it may cut the aramid rope on the roller table. At this time, the aramid rope should be replaced in time, otherwise the tempered glass will not be able to pass smoothly.
2. First, remove the damaged aramid rope from the transmission roller, and then remove the adhesive substances and adhesives on the surface of the roller. This process is to ensure the cleanliness of the surface of the tempered roller.
3. Apply glue to the inner surface of the aramid rope for better bonding with the roller.
4. When winding the aramid rope, ensure that the aramid rope is in a taut state to ensure that it is straight and not twisted. The spiral pitch of the aramid rope is uniform, and the direction of rotation is opposite to that of the aramid rope on the adjacent roller conveyor. Finally, the head and tail ends of the aramid rope are firmly fixed on the transmission roller of the cooling section.