Availability: | |
---|---|
Quantity: | |
LKV001
LEVER
84669100
Application: for processing laminated glass
Tool: Hand-held film sealing machine, electrical soldering iron,
special sealant strip, non-woven fabric, high-temperature vacuum film
We have 7 sizes for this vacuum film:
0.835mx500m/unfold 1.65mx250m/417.5m2
0.96mx500m/unfold.1.9mX250m/480m2
1.06mx500m/unfold.2.1mx250m/530m2
1.16mx500m/unfold.2.3mx250m/580m2
1.26mx500m/unfold.2.5mx250m/630m2
1.36mx500m/unfold.2.7mx250m/680m2
1.51mx400m/unfold.3mx200m/604m2
FAQ:
1. For the breather, normally, if the glass size/bag size is less than 1 m2, you only need to use 1 pcs breather. If the glass size is more than 1m2, you need to use 2 pcs breather (1 pcs at each side). But for some jumbo size, maybe you need 4 pcs breather (2 pcs at each side). So it depends on the glass size.
2. for the vacuum pipe, we will send them to you in roll, you can cut it by yourselves according to your place. Normally, if your autoclave already has the vacuum piping system, you should cut the vacuum pipe according the distance between the glass and vacuum piping joint in the autoclave. If your autoclave don’t have the
piping system inside, you should use the vacuum pump system at out side, and make the vacuum piping before autoclave processing. You should cut the vacuum pipe length according to your actual distance.
3. for the sealant strip, it is used to seal the breathers to make a perfect sealing, pls check the video
Pls check, if you have any question, pls let me know
Application: for processing laminated glass
Tool: Hand-held film sealing machine, electrical soldering iron,
special sealant strip, non-woven fabric, high-temperature vacuum film
We have 7 sizes for this vacuum film:
0.835mx500m/unfold 1.65mx250m/417.5m2
0.96mx500m/unfold.1.9mX250m/480m2
1.06mx500m/unfold.2.1mx250m/530m2
1.16mx500m/unfold.2.3mx250m/580m2
1.26mx500m/unfold.2.5mx250m/630m2
1.36mx500m/unfold.2.7mx250m/680m2
1.51mx400m/unfold.3mx200m/604m2
FAQ:
1. For the breather, normally, if the glass size/bag size is less than 1 m2, you only need to use 1 pcs breather. If the glass size is more than 1m2, you need to use 2 pcs breather (1 pcs at each side). But for some jumbo size, maybe you need 4 pcs breather (2 pcs at each side). So it depends on the glass size.
2. for the vacuum pipe, we will send them to you in roll, you can cut it by yourselves according to your place. Normally, if your autoclave already has the vacuum piping system, you should cut the vacuum pipe according the distance between the glass and vacuum piping joint in the autoclave. If your autoclave don’t have the
piping system inside, you should use the vacuum pump system at out side, and make the vacuum piping before autoclave processing. You should cut the vacuum pipe length according to your actual distance.
3. for the sealant strip, it is used to seal the breathers to make a perfect sealing, pls check the video
Pls check, if you have any question, pls let me know