The two-heating chamber glass tempering machine is a newly machine for tempered glass processing. It has higher capacity and better glass surface quality. It is more suitable for the glass factory who has higher order & glass quality demand.
| Quantity: | |
|---|---|
LV-STF
LEVER
84752919
Suitable For:
1. Clear & ultra-clear float glass
2. Reflective glass
3. Online/Hard & offline/Soft Low-E glass (E≥0.01;Low-E film should be resistant to more than 700℃)
4. Patterned glass (not for all patterns)
5. Body-tinted glass
6. Silk screen printed glass (The printing ink should be temperable and resistant to more than 700℃)
Technical Features:
1. Two heating chamber with higher productivity, avoid inside oven-broken for thick glass and white fog for thin glass.
2. Different heating temperature & setting for chamber 1 (lower temperature) & chamber 2 to achieve higher quality.
3. Reciprocating or continuous type for choice, multi working positions available.
4. Sectional heating, individual heating zones for each working position.
5. Force convection system for one chamber or two chambers
6. Ceramic plates at the top of oven.
7. Ceramic rollers driven by triple belts ensure better simultaneous and stable running.
8. Ceramic support for heating elements, avoid earth to avoid heater trouble.
9. Gapless heating technology
10. Sectional driving technology for motor
11. Network data for servo motor control mode to avoid disturbance.
Model | Max. Glass Size (mm) | Min. Glass Size (mm) | Thickness (mm) | Capacity (5mm) (Batchs/Hour) |
LV-STF1742II | 1700x4200 | 100x250 | 3-19mm | 22-23 |
LV-STF2450II | 2440x5000 | 150x280 | 4-19mm | 22-23 |
LV-STF2860II | 2800x6000 | 150x280 | 5-19mm | 22-23 |
LV-STF3050II | 3000x5000 | 200x350 | 5-19mm | 22-23 |
LV-STF3080II | 3000x8000 | 200x350 | 5-19mm | 21-22 |
LV-STF3360II | 3300x6000 | 200x500 | 5-19mm | 22-23 |
LV-STF33100II | 3300x11000 | 200x500 | 5-19mm | 21-22 |
The advantages for two heating chamber glass tempering furnace:
1. Higher yield
2. The optical performance of the glass surface is good
3. When processing thick glass, the glass will not burst in the heating furnace
4. Better flatness of glass
5. The cooling section is divided into high-pressure section and cooling section; The wind pressure in the high-pressure section is about 15000Pa, requiring 2 fans; The wind pressure in the cooling section is approximately 7000Pa, requiring 1 fan
6. The energy consumption is slightly lower, for example, the energy consumption of ordinary glass is about 3.5-4KWH/M2; Double chamber furnace month: 3.2-3.5KWH/M2
FAQ:
Q.: When will should i buy a glass tempering furnace with two heating chambers?
A. If you have many orders, but one set of glass tempering furnace could not meet the order demand. And you don’t have space or extra investment to buy another separate glass tempering furnace. If you want to improve the quality of tempered glass.
Q.: Do these two heating chamber has force convection system?
A. Yes, if the investment is ok, we suggest you to make both two heating chamber with force convection system. This is very good to produce the triple silver Low-E glass. Now, in the market, there are more than 60% two-heating chamber furnace has 2 force convection system. If you don’t have triple silver coated glass, you also could choose one heating chamber has force convection system, this could temper double silver coated glass.
Suitable For:
1. Clear & ultra-clear float glass
2. Reflective glass
3. Online/Hard & offline/Soft Low-E glass (E≥0.01;Low-E film should be resistant to more than 700℃)
4. Patterned glass (not for all patterns)
5. Body-tinted glass
6. Silk screen printed glass (The printing ink should be temperable and resistant to more than 700℃)
Technical Features:
1. Two heating chamber with higher productivity, avoid inside oven-broken for thick glass and white fog for thin glass.
2. Different heating temperature & setting for chamber 1 (lower temperature) & chamber 2 to achieve higher quality.
3. Reciprocating or continuous type for choice, multi working positions available.
4. Sectional heating, individual heating zones for each working position.
5. Force convection system for one chamber or two chambers
6. Ceramic plates at the top of oven.
7. Ceramic rollers driven by triple belts ensure better simultaneous and stable running.
8. Ceramic support for heating elements, avoid earth to avoid heater trouble.
9. Gapless heating technology
10. Sectional driving technology for motor
11. Network data for servo motor control mode to avoid disturbance.
Model | Max. Glass Size (mm) | Min. Glass Size (mm) | Thickness (mm) | Capacity (5mm) (Batchs/Hour) |
LV-STF1742II | 1700x4200 | 100x250 | 3-19mm | 22-23 |
LV-STF2450II | 2440x5000 | 150x280 | 4-19mm | 22-23 |
LV-STF2860II | 2800x6000 | 150x280 | 5-19mm | 22-23 |
LV-STF3050II | 3000x5000 | 200x350 | 5-19mm | 22-23 |
LV-STF3080II | 3000x8000 | 200x350 | 5-19mm | 21-22 |
LV-STF3360II | 3300x6000 | 200x500 | 5-19mm | 22-23 |
LV-STF33100II | 3300x11000 | 200x500 | 5-19mm | 21-22 |
The advantages for two heating chamber glass tempering furnace:
1. Higher yield
2. The optical performance of the glass surface is good
3. When processing thick glass, the glass will not burst in the heating furnace
4. Better flatness of glass
5. The cooling section is divided into high-pressure section and cooling section; The wind pressure in the high-pressure section is about 15000Pa, requiring 2 fans; The wind pressure in the cooling section is approximately 7000Pa, requiring 1 fan
6. The energy consumption is slightly lower, for example, the energy consumption of ordinary glass is about 3.5-4KWH/M2; Double chamber furnace month: 3.2-3.5KWH/M2
FAQ:
Q.: When will should i buy a glass tempering furnace with two heating chambers?
A. If you have many orders, but one set of glass tempering furnace could not meet the order demand. And you don’t have space or extra investment to buy another separate glass tempering furnace. If you want to improve the quality of tempered glass.
Q.: Do these two heating chamber has force convection system?
A. Yes, if the investment is ok, we suggest you to make both two heating chamber with force convection system. This is very good to produce the triple silver Low-E glass. Now, in the market, there are more than 60% two-heating chamber furnace has 2 force convection system. If you don’t have triple silver coated glass, you also could choose one heating chamber has force convection system, this could temper double silver coated glass.
