| Quantity: | |
|---|---|
LVW001
LEVER
84669100
Basic technical data:
Bristle thickness (diameter): 0.15-0.25mm (soft)
Brush diameter: approximately 200mm
Bristle length: 20-40 mm
Bristle material: polyamide (nylon).
Steel shaft: 45#
Requirements for cleaning water: conductivity ≤ 20us/cm
For the off-line Low-e glass (hard type), pls temper them within 4 hours after being washed by glass washing machine, otherwise, the residual water on the glass surface will affect the coating film.
What is the basic requirements for this nylon bristle brush roller?
1. Brush material
The brush of glass washer is generally made of nylon, because it has good wear resistance, acid and alkali resistance and anti-aging performance, and can be used for a long time without deformation and depilation.
2. Brush fineness
The fineness of the brush roller of glass washing machine is also important, generally requiring around 0.15mm. This type of brush neither scratches the glass nor cleans the dirt on the surface of the glass smoothly.
3. Brush shape
The shape of the brush roller should also meet the requirements, and common shapes include round, square, oval, etc. At the same time, the width of the brush should also be selected appropriately, so that it can cover most of the area on the glass surface.
4. Brush softness and hardness
The softness and hardness of the brush roll also need to be considered. Generally, a soft brush should be chosen to avoid scratching the glass surface.
In summary, selecting the appropriate brush roller plays a crucial role in the use of glass washing machine. Only by selecting brush rolls that meet the standards can the smoothness and cleaning effect of the glass surface be ensured.
FAQ:
What are the requirements for brush roller to wash clean Low-E glass?
Due to the special material of its film layer, the Low-e glass film layer has high requirements for the brush roll of the glass washing machine when passing through the cleaning and drying section;
The brush wires must be high-grade nylon brush wire, such as PA1010, PA612, etc., with a diameter of 0.1-0.15mm being preferred;
To ensure good softness, strong elasticity, acid and alkali resistance, high temperature resistance, and the ability to easily remove dust on the surface of Low-E glass without causing damage to the film layer on the surface of Low-E glass;
Basic technical data:
Bristle thickness (diameter): 0.15-0.25mm (soft)
Brush diameter: approximately 200mm
Bristle length: 20-40 mm
Bristle material: polyamide (nylon).
Steel shaft: 45#
Requirements for cleaning water: conductivity ≤ 20us/cm
For the off-line Low-e glass (hard type), pls temper them within 4 hours after being washed by glass washing machine, otherwise, the residual water on the glass surface will affect the coating film.
What is the basic requirements for this nylon bristle brush roller?
1. Brush material
The brush of glass washer is generally made of nylon, because it has good wear resistance, acid and alkali resistance and anti-aging performance, and can be used for a long time without deformation and depilation.
2. Brush fineness
The fineness of the brush roller of glass washing machine is also important, generally requiring around 0.15mm. This type of brush neither scratches the glass nor cleans the dirt on the surface of the glass smoothly.
3. Brush shape
The shape of the brush roller should also meet the requirements, and common shapes include round, square, oval, etc. At the same time, the width of the brush should also be selected appropriately, so that it can cover most of the area on the glass surface.
4. Brush softness and hardness
The softness and hardness of the brush roll also need to be considered. Generally, a soft brush should be chosen to avoid scratching the glass surface.
In summary, selecting the appropriate brush roller plays a crucial role in the use of glass washing machine. Only by selecting brush rolls that meet the standards can the smoothness and cleaning effect of the glass surface be ensured.
FAQ:
What are the requirements for brush roller to wash clean Low-E glass?
Due to the special material of its film layer, the Low-e glass film layer has high requirements for the brush roll of the glass washing machine when passing through the cleaning and drying section;
The brush wires must be high-grade nylon brush wire, such as PA1010, PA612, etc., with a diameter of 0.1-0.15mm being preferred;
To ensure good softness, strong elasticity, acid and alkali resistance, high temperature resistance, and the ability to easily remove dust on the surface of Low-E glass without causing damage to the film layer on the surface of Low-E glass;
