Availability: | |
---|---|
Quantity: | |
LV-TBV
LEVER
84752919
Supply Scope:
1. Loading section
2. Heating section (with Vesuvius ceramic roller)
3. Forming section (mould bent)
4. Quenching section
5. Transmission section
6. Cooling section
7. Unloading section
8. Glass mould: 1 set
9. Blower system
10. Electrical & control system
11. Spare parts as listed in appendix
12. Technical documents
Popular model and technical specifications:
Model: LV-TB1608V (III)
Max. Glass size: ᴖ1600x ᴖ800mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 3.5-6mm
Max. Bent depth: 150mm
Capacity: 55 Loads per hour (4mm as sample)
Power: 370kw+320kw (heating power + cooling power)
Popular model and technical specifications:
Model: LV-TB1810V (III)
Max. Glass size: ᴖ1800x ᴖ1000mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 4-6mm
Max. Bent depth: 150mm
Capacity: 55 Loads per hour (4mm as sample)
Power:500kw+400kw (heating power + cooling power)
Popular model and technical specifications:
Model: LV-TB2012V (III)
Max. Glass size: ᴖ2000x ᴖ1200mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 4-6mm
Max. Bent depth: 250mm
Capacity: 55 Loads per hour (4mm as sample)
Power:650kw+320kw (heating power + cooling power)
Popular model and technical specifications:
Model: LV-TB2212V (III)
Max. Glass size: ᴖ2200x ᴖ1200mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 4-6mm
Max. Bent depth: 300mm
Capacity: 55 Loads per hour (4mm as sample)
Power:710kw+320kw (heating power + cooling power)
The above models are only for your reference, we can design and make the machine according to customer’s requirements.
Special Machine Features
Loading Table
1. Equipped with LED light to detect the glass with defects.
Heating Furnace
2. Sectional heating, individual heating zones for each working position. There are ceramic plates to divide the different heating zones.
3. There are ceramic plates at the top of oven, which could ensure more even heating, avoid dregs falling. But the cost is higher and has higher requirements on the installation.
4. The ceramic rollers system is driven by triple belts, which can ensure better simultaneous and stable running, and avoid the scratch and destroy of glass when above the rollers. It would not affect the running when any one of belt damaged. The design as below picture
5. Same top quality insulating materials for whole heating oven
6. Heating elements use the gapless design (parallelogram shape), which could make the heating more even. This could improve the finished product rate and better product quality. The design as below picture:
7. Using ceramic support for heating elements, which could avoid earth to avoid heater trouble
8. Trumpet type air nozzle, which makes stronger air pressure, better quality, lower energy consumption, as below picture:
9. Modular quenching design, makes adjustment more precision, mould-change more easy, and changing time shorter.
10. Cooling fans for further cooling
Control system:
11. Network data for servo motor control mode: Profinet, compared with traditional wiring-connection, this mode could reduce disturbance
FAQ:
Q.: Why should i choose your backlite glass tempering furnace?
A. In China, we are the best supplier to make the high grade backlite glass tempering furnace.Our machine is the best choice for OEM automotive glass factory.
Q.: Does this machine need mould?
A. Yes. For most back window of car or bus, the glass has multiple curvature, so normal roller bent glass tempering furnace could not make this kind of glass.
Q. How many mould need for this furnace?
A. Actually, for different glass shape, it needs different mould. This could guarantee accurate shape.
Q.Should we need to change the shape of quenching section for each glass type?
A. No need. But if the glass shape has big different. You should adjust the quenching to a required shape.
Q. For glass forming, does it need pressing mould?
A. Normally, no need the pressing mould. But for some glass with big depth or special shape, it needs the pressing mould. The glass could not achieve required shape only with support mould.
Supply Scope:
1. Loading section
2. Heating section (with Vesuvius ceramic roller)
3. Forming section (mould bent)
4. Quenching section
5. Transmission section
6. Cooling section
7. Unloading section
8. Glass mould: 1 set
9. Blower system
10. Electrical & control system
11. Spare parts as listed in appendix
12. Technical documents
Popular model and technical specifications:
Model: LV-TB1608V (III)
Max. Glass size: ᴖ1600x ᴖ800mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 3.5-6mm
Max. Bent depth: 150mm
Capacity: 55 Loads per hour (4mm as sample)
Power: 370kw+320kw (heating power + cooling power)
Popular model and technical specifications:
Model: LV-TB1810V (III)
Max. Glass size: ᴖ1800x ᴖ1000mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 4-6mm
Max. Bent depth: 150mm
Capacity: 55 Loads per hour (4mm as sample)
Power:500kw+400kw (heating power + cooling power)
Popular model and technical specifications:
Model: LV-TB2012V (III)
Max. Glass size: ᴖ2000x ᴖ1200mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 4-6mm
Max. Bent depth: 250mm
Capacity: 55 Loads per hour (4mm as sample)
Power:650kw+320kw (heating power + cooling power)
Popular model and technical specifications:
Model: LV-TB2212V (III)
Max. Glass size: ᴖ2200x ᴖ1200mm
Min. Glass size: ᴖ200x ᴖ300mm
Glass thickness: 4-6mm
Max. Bent depth: 300mm
Capacity: 55 Loads per hour (4mm as sample)
Power:710kw+320kw (heating power + cooling power)
The above models are only for your reference, we can design and make the machine according to customer’s requirements.
Special Machine Features
Loading Table
1. Equipped with LED light to detect the glass with defects.
Heating Furnace
2. Sectional heating, individual heating zones for each working position. There are ceramic plates to divide the different heating zones.
3. There are ceramic plates at the top of oven, which could ensure more even heating, avoid dregs falling. But the cost is higher and has higher requirements on the installation.
4. The ceramic rollers system is driven by triple belts, which can ensure better simultaneous and stable running, and avoid the scratch and destroy of glass when above the rollers. It would not affect the running when any one of belt damaged. The design as below picture
5. Same top quality insulating materials for whole heating oven
6. Heating elements use the gapless design (parallelogram shape), which could make the heating more even. This could improve the finished product rate and better product quality. The design as below picture:
7. Using ceramic support for heating elements, which could avoid earth to avoid heater trouble
8. Trumpet type air nozzle, which makes stronger air pressure, better quality, lower energy consumption, as below picture:
9. Modular quenching design, makes adjustment more precision, mould-change more easy, and changing time shorter.
10. Cooling fans for further cooling
Control system:
11. Network data for servo motor control mode: Profinet, compared with traditional wiring-connection, this mode could reduce disturbance
FAQ:
Q.: Why should i choose your backlite glass tempering furnace?
A. In China, we are the best supplier to make the high grade backlite glass tempering furnace.Our machine is the best choice for OEM automotive glass factory.
Q.: Does this machine need mould?
A. Yes. For most back window of car or bus, the glass has multiple curvature, so normal roller bent glass tempering furnace could not make this kind of glass.
Q. How many mould need for this furnace?
A. Actually, for different glass shape, it needs different mould. This could guarantee accurate shape.
Q.Should we need to change the shape of quenching section for each glass type?
A. No need. But if the glass shape has big different. You should adjust the quenching to a required shape.
Q. For glass forming, does it need pressing mould?
A. Normally, no need the pressing mould. But for some glass with big depth or special shape, it needs the pressing mould. The glass could not achieve required shape only with support mould.